Veritas Honing Guide & Angle Jig Combination

Made in Canada

• Model No. 05M02.10
• The Angle Setting Jig sets blade level at 15°, 20°, 25°, 30°, & 35° angles
• Honing Guide accurately hones chisel & plane blades with precise bevel angles - Will sharpen blades up to 2-3/8" wide & 5/8" thick
• Cam roller creates a micro-bevel without unclamping or resetting tool
• Sturdy & smooth rolling brass wheel on honing guide

• Main frame of honing guide has a die-casting, & the other parts on guide are made of brass & steel

• Product Description
• Specs

• This precision Veritas Honing Guide & Angle Jig is a durable & accurate jig system for shapening edge-cutting tools. The honing guide has a very wide roller, & is uniquely suited to adding a micro bevel after sharpening. Simply hone then turn the guide setting knob & give it a few more strokes. The main frame is made from a die-casting, & the other parts are all machined from brass & steel. For maximum versatility, it should be used with the angle setting jig which has the five most common bevel angles built into a pentagon wheel. The Angle Setting Jig sets the blade level at 15°, 20°, 25°, 30°, & 35° angles. *Note: Stone, Chisel, & Iron in pictures not included.

• Product Title	Overall Angle Jig Size	Overall Honing Jig Size	Brass Roller Length	Model #
  Veritas Honing Guide & Angle Jig Combination	7-1/4" Long  x  2" Wide	3-1/2" Long  x  2-7/8" High  x  1-1/4" Wide	1-1/4"	05M02.10  |  860-3021

   

     For California Residents:

  
  

     WARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov

  
  

     WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood